EEGR211 Basic Logic Gates i need lab report inclode data and every thing EEGR 211 – Introduction to Digital Logic Lab 0 In this lab, students will explore

EEGR211 Basic Logic Gates i need lab report inclode data and every thing EEGR 211 – Introduction to Digital Logic
Lab 0
In this lab, students will explore the basic logic gates in order to determine the behavior of the logic gates. Each
student must complete this lab independently.
Prior to coming to lab, watch the following video that will prepare for the lab.

1. Logic Gates: For this lab, you will need a NOT gate, and one each of a two-input AND, OR, NOR and
NAND integrated circuits. At the end of the lab, you should have measured five gates.
2. Data sheet: Find the data sheet for each IC, as directed by your instructor.
a. Using the voltage ranges indicated for VCC and ground, power the IC.
Use typical value
Pin connections
Values you should
measure at the
output of the gates.
3. Truth table: Apply the voltages indicated for VIH and VIL to the inputs of each gate to obtain the truth
table for each IC.
a. Apply different input combinations and measure the corresponding outputs (see examples
below).
NOT gate (inverter)
measurements
Input
Output
0.01V
3.70V
5.00 V
0.25 V
InputA
LOW
LOW
HIGH
HIGH
AND gate
Truth Table
InputB
LOW
HIGH
LOW
HIGH
NOT gate (inverter)
Truth Table
Input
Output
LOW
HIGH
HIGH
LOW
Output
LOW
LOW
LOW
HIGH

Purchase answer to see full
attachment